|
IDC ConnectorsIDC Connector, 2.0mm IDC Dip Plug - 4408 Series
Series 4408 is a 2.0mm IDC Dip Plug.
2.0mm IDC Socket Connector - 4400 Series
Series 4400 is a 2.0mm IDC Socket Connector.
2.54mm IDC Card Edge Connector - 4402 Series
Series 4402 is a 2.54mm IDC Card Edge Connector.
2.54mm IDC Dip Plug <2.54mmX2.54mm> - 4403 Series
Series 4403 is a 2.54mm IDC Dip plug.
2.54MM IDC Dip Plug 0.3"/0.6" Space - 4404A/B Series
Series 4404A is available with 0.3" spacing.
2.54MM IDC Dip Plug 0.3"/0.6" Space - 4404A/B Series
Series 4404B is available with 0.6" spacing.
2.54mm IDC Socket Connector - 4401 Series
Series 4400 is a 2.54mm IDC Socket Connector available with or without strain relief.
2.54mm IDC Staggered Terminal Transition Plug Connector - Series 4405
Series 4405 is a 2.54mm IDC Staggered Terminal Transition Plug Connector.
D-SUB Flat Cable IDC Connector - 5506 Series
Series 5506 is available in black or blue.
D-SUB IDC Flat Cable Connectors
D-Subs for mass termination connections to flat cable AWG 28 without wire stripping
Compatible with all other D-Sub connectors
Connect to single connectors or use as jumpers
Connectors have high pull-out resistance, Conform to MIL-C-24308 IDC Card Edge Connector
Reliable interface to standard double sides
Cable self-alignment slots on the underside cover
Good contact design offers two points of contact
Additional polarization features available upon request
IDC-DIP Flat Cable Connector
Open frame version
Ideal for board-to-board application
Mates with standard Dip Sockets ("ICS Series") 2.54mm x7.62mm (0.100" x 0.300"), or 2.54mm x
15.24mm (0.100"x 0.600")
Ribbed base aids cable positioning » Grooved cable positioning
Heavy duty contacts with extra strength
IDC-Header Four Wall
MIL-C-83503 compatible
Four wall construction for maximum plug stability
Comes with straight or right angle terminals
Center slot prevents 180° mismating
Ejector latches offered in two lengths for sockets with or without strain relief
Mating Series: FSC
IDC-Mini Dip Flat Cable Connectors
Open frame version
Ideal for high density stacking on the PC Board
Designed to fit into standard 2.54mm x 2.54mm (0.100" x 0.100") grid pattern
Provision of ease and permanent termination of flat cable to PCB
Ribbed base aids cable positioning
Grooved cable positioning
IDC-Socket Flat Cable Connector
MIL-C-83503 compatible
Center Polarization Bump option
Contact recess in cover
Ribbed cover for positive cable location
Mating Series: FHC, PH, LPH
Ultra ATA Bus 40P IDC Connector - 4410 Series
Series 4410 is available in blue, black, or gray. |
|
